DIY BB Gun

User-Contributed Project

User-Contributed Project

This project guide is not managed by MAKE staff.

Make a DIY BB gun, but be careful and don't hurt anyone!

  • Add Note x
  • x 6

IF YOU HURT SOMEONE AND BRING ME TO COURT, I WILL NOT TAKE RESPONSIBILITY AND I WILL PRINT THIS TO SHOW MY ADVISORY!

Tools
Relevant parts
first image

Add Note Edit Step 1 — DIY BB Gun  ¶ 

  • Remove the top of the pencil (just pull it off with your teeth).

first image

Add Note Edit Step 2  ¶ 

  • Cut the part where the lead ejects.

first image

Add Note Edit Step 3  ¶ 

  • Pull the core out.

  • Throw out the tip and save the spring as it can be useful in the future.

first image
thumb image 1
thumb image 2

Add Note Edit Step 4  ¶ 

  • Cut the part on the pencil body so it is gone and cut the lead core where I did.

first image
thumb image 1
thumb image 2

Add Note Edit Step 5  ¶ 

  • Put a rubber band on the clip.

first image

Add Note Edit Step 6  ¶ 

  • Pull the rubber band behind the eraser hole and insert the eraser (or use whatever works for you).

For more information, check out the Recycle category page.

Did you successfully follow this guide?

This guide has been completed 6 times.

Comments Add Note Comments are onturn off

No comments.